|
Re: Penumatics confused
The high pressure side of the robot should be at 120 psi, give or take a few. You then step down to 60 PSI for the low pressure side, through a regulator.
Make sure you have gauges on both the high and low side, a manual release valve, and a blow off valve. Read and re-read the pneumatic section of the rulebook - there are some great pictures in there showing you how to hook everything up.
__________________
2007 - Present: Mentor, 2177 The Robettes
LRI: North Star 2012-2016; Lake Superior 2013-2014; MN State Tournament 2013-2014, 2016; Galileo 2016; Iowa 2017
2015: North Star Regional Volunteer of the Year
2016: Lake Superior WFFA
|