|
Re: How to deploy code from wifi to crio
To fix the DLink try: - Power the DLink on
- Set the switch on the back of the DLink to 2.4GHz
- After the DLink is powered, use a paperclip to press the recessed white Reset button on the back of the DLink and hold it down for a slow count of 10
- Connect your laptop to the DLink with an Ethernet cable and try the Bridge Configuration Utility
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 13-01-2015 at 20:50.
|