|
Re: Looking for Lead Screws
Quote:
Originally Posted by Jared
As others have said a 3/4" lead screw is more than likely overkill. We lifted our entire robot with a huge factor of safety with two 1/2" diameter lead screws.
|
The reason we were looking for 3/4 is for speed and torque purposes. With the current design we would go around 20 ft per second.
__________________
2010-2013 Team 353 The POBots - Student, 2014-present Alumni.
2014- present Team 5030 The Second Mouse - Mentor and Founder.
|