View Single Post
  #2   Spotlight this post!  
Unread 15-01-2015, 17:26
zcohen zcohen is offline
Registered User
AKA: Zac
FRC #1111 (Power Hawks)
Team Role: Teacher
 
Join Date: Jan 2013
Rookie Year: 2006
Location: Annapolis, MD
Posts: 31
zcohen is a splendid one to beholdzcohen is a splendid one to beholdzcohen is a splendid one to beholdzcohen is a splendid one to beholdzcohen is a splendid one to beholdzcohen is a splendid one to beholdzcohen is a splendid one to beholdzcohen is a splendid one to behold
Re: Vex Solenoid Base Mount Configuration

Check out this link:
http://content.vexrobotics.com/vexpr...s-20141010.PDF
You can see on the side of the mounts you have exhaust ports--just let these be, and a pressure input in the middle. You have you incoming air from your tanks go to this port. You then attach the solenoids along the top, as shown on the second page. The coresponding ports on the side are where you hook up the air to go out as the solenoid is activated. If you have a spare port open, you need to cover it using the blank station kit or else it will leak out of that hole.
__________________
Zachary Cohen
Team 1111 head mentor 2012-
Team 1712 mentor 2007-2012, 2006 alum

Technology and Engineering teacher
PLTW, STEM Magnet School
South River High School