View Single Post
  #19   Spotlight this post!  
Unread 15-01-2015, 19:38
iggy_gim's Avatar
iggy_gim iggy_gim is offline
Registered User
AKA: Theodore Kim
FRC #5123 (Mechadogs)
Team Role: Mentor
 
Join Date: Jan 2014
Rookie Year: 2012
Location: Yonkers, NY
Posts: 79
iggy_gim is on a distinguished road
Re: Problems Configuring Radio

Thanks for your response. Just a couple questions.

Quote:
Similar: Identical first 3 numbers, but different 4th number. Ideally less than 10 different from each other, and not spanning 127/128, less than 255, and greater than 0.
Thank you for that. I am really not the one troubleshooting this problem, someone else is, I am just the liaison for Chief Delphi, so I don't know exactly if the person actually working on this problem set the IP addresses to the same address, she just told me that she "matched" them. Maybe that mean she set them to the same IP address or she set them correctly.

Quote:
Turn everything off and unplug everything, meaning also disconnect the roboRIO and anything else plugged into the radio.
Was the roboRIO supposed to be connected to the router to begin with. We have just done it disconnected from the roboRIO.

Lastly, I noticed two things today. Firstly, in the initial dialog box of the utility, the Local Area Connection 3* option does not show up anymore (it did before). What does that mean? Secondly, I noticed in the Labview folder there are two configuration utilities one Java named FRC_Team_Radio_Kiosk and one normal application FRC Bridge Configuration Utility. We have been using the latter, is that the correct application?

Thanks again for all of your help, we have been struggling with this for a week now and it really is frustrating, yet I know that all problems have a solution!
__________________
My motto: Eh... that looks about right...
---------------
2013: Team 2344 Saunders Droid Factory
2014-16: Team 5123 Mechadogs, Captain/Founder
2017: Team 5123 Mechadogs Mentor