|
Re: Random questions from first year programmer
The PDP blinking red means the CAN wiring is not hooked up or is reversed somewhere. You don't need that right away if you are just run your motors, but you'll need to fix that eventually.
Is your Driver Station Enabled?
Do the Communications and Robot Code indicators on the Driver Station show green?
You'll need the Driver Station communicating with the roboRIO over a USB
or Ethernet through the DLink router setup with the Bridge Cinfiguration Utility.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
|