|
Re: How thick to buy HDPE?
Quote:
Originally Posted by BeardyMentor
To get the 'orange peel' texture, look for Starboard. It will have the correct finish. Most unbranded HDPE will have the smooth finish. For the chute, 1/16 inch sheets should be fine as a surface. Going thinner for the Step could prove difficult just because thin Starboard is hard to find.
|
Is "Starboard" a manufacture or brand name? Is it what First specifically used on the field? Agreed that unless you specify a surface finish you are likely to get smooth.
__________________
If you don't know what you should hook up then you should read a data sheet
|