View Single Post
  #8   Spotlight this post!  
Unread 26-01-2015, 20:51
tr6scott's Avatar
tr6scott tr6scott is offline
Um, I smell Motor!
AKA: Scott McBride
FRC #2137 (TORC)
Team Role: Mentor
 
Join Date: Dec 2007
Rookie Year: 2005
Location: Oxford, MI
Posts: 507
tr6scott has a reputation beyond reputetr6scott has a reputation beyond reputetr6scott has a reputation beyond reputetr6scott has a reputation beyond reputetr6scott has a reputation beyond reputetr6scott has a reputation beyond reputetr6scott has a reputation beyond reputetr6scott has a reputation beyond reputetr6scott has a reputation beyond reputetr6scott has a reputation beyond reputetr6scott has a reputation beyond repute
Re: Photoeye's not working-Difference between RoboRIO and Digital Side Card?

Did some more extensive testing tonight during our meeting.

The Working AB Part number was
42CA-P2MNB-A2

Another non-functioning Banner sensor was QS30LV

We also found the following Banner Switches to also work.
T18SN6FF50

T30SN6FF400

I tested with the sensors connected to the both the 12v 2a power rail, and also wired direct to the same power leads as the roboRIO without any impact on working state.

Both non-working Banner part numbers status lights work as expected, and I tested multiple sensors of each type, Power indicator works, and sensor tripped worked, just would not fire the roborio input.
__________________
The sooner we get behind schedule, the more time we have to catch up.


Last edited by tr6scott : 27-01-2015 at 08:33. Reason: Took out dash in AB part number.