Quote:
Originally Posted by Ether
What he needs to do is swap the FrontRight and BackLeft motor commands (if the rotate clockwise command is causing the wheels to turn "outward") or swap the FrontLeft and BackRight motor commands (if the rotate clockwise command is causing the wheels to turn "inward").
|
The
attached chart shows the situation if OP meant to say that a rotate
clockwise command
caused the
front wheels to rotate forward and the
back wheels to rotate backward.
- Green means wheel rotation forward
- Red means wheel rotation backward
- Columns B D F H J L show what it should be
- Columns labeled "?" show what it is actually doing (per OP's testing)
As you can see, swapping the FrontRight and BackLeft motor commands will correct the problem:
- the RCW and RCC will be corrected, and
- the already correct FWD, REV, STR, & STL will be unaffected