Thread: Pneumatic Piston using Labview will not fire
View Single Post
  #1   Spotlight this post!  
Unread 29-01-2015, 18:51
blincoln1534@gm's Avatar
blincoln1534@gm blincoln1534@gm is offline
Billy Lincoln
FRC #5000 (The Hammerheads)
Team Role: Leadership
  
Join Date: Jan 2015
Rookie Year: 2014
Location: Hingham, Ma
Posts: 23
blincoln1534@gm is an unknown quantity at this point
Pneumatic Piston using Labview will not fire
Here's our dilemma,

We have 1 double solenoid powering 2 pneumatic pistons. The toggle for them firing is supposed to be a single button (the trigger aka button 1) on the joystick. However, when he hit the button nothing happens. The extend side of the solenoid is connected to the 0 port on the PCM and the retract side of the solenoid is connected to the 1 port on the PCM. The joystick for this system is connected to USB 1. I have attached our code thus far. Let me know if I can answer any questions.

I have tried several sites, but cannot figure out what is wrong. Thanks!
Attached Files
File Type: zip 2015Team5000Code.zip (4.11 MB, 33 views)