I'm having some issues with getting I2C to work on the Java library. I'm using a triple axis magnetometer ->
https://www.sparkfun.com/products/10530
This is the code i have ->
http://pastebin.com/Ad9pbuf0
I used the same hex commands from the sparkfun tutorial ->
https://www.sparkfun.com/tutorials/301
0x02 Select mode register
0x00 Continuous measurement mode
0x03 Select register 3, X MSB register (Most Significant Bit)
Using the code above i get jumbled numbers back, and it does not update continuously.
Thanks,
Matthew Smith