|
Solenoid Not Working
We are a rookie team from Japan and we decided to use pneumatics for our arm. Now we have some trouble with controlling the solenoid.
First, we connected everything on PCM as the Screensteps is showing. We have connected PCM with CAN, and we can control our compressor.
Also, when we program some code with solenoids then we can see the red light going on and off on the PCM solenoid ports. There're orange lights going on/off on the solenoid too, so we know that the solenoid is receiving the code.
But when we run it, the air keeps coming out through one of the holes (#2) and doesn't through another hole (#4) on the solenoid. What's going on?
|