|
Re: Anyone heard more about the Ekocycle 3D printer?
Ours has worked very well so far too. Encoder mounts, Jigs for hole patterns, Jetson TK1 mount, custom electronics mounts. And more to come. Also haven't needed anymore filament. Also if you want clearance for #8 screws use .190" for the hole diameter. For 1/4"-20 use .280".
Note; It's usually cold in our shop (40-60deg F)
__________________
---------------------
Alumni, CAD Designer, machinist, and Mentor: FRC Team #4080
Mentor: Rookie FTC Team "EVE" #10458, FRC Team "Drewbotics" #5812
#banthebag
#RIBMEATS
#1620
Last edited by jman4747 : 03-02-2015 at 09:40.
|