Thread: PCM IS NOT ENABLED
View Single Post
  #5   Spotlight this post!  
Unread 05-02-2015, 15:58
nighterfighter nighterfighter is offline
1771 Alum, 1771 Mentor
AKA: Matt B
FRC #1771 (1771)
Team Role: Mentor
  
Join Date: Sep 2009
Rookie Year: 2007
Location: Suwanee/Kennesaw, GA
Posts: 835
nighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant futurenighterfighter has a brilliant future
Re: PCM IS NOT ENABLED
Quote:
Originally Posted by rtfgnow View Post
Can you confirm that the CAN id for the PCM is 0?

I assume you have a pressure switch wired in and you have tried enabling the robot. Please correct me if that is wrong.
Is the CAN id for the PCM required to be 0 for C++?

Because unless an update changed something, the PDP is needed to be 0, in C++. There is no constructor in WPILib for the PowerDistributionPanel class to make the PDP anything other than 0. (http://www.chiefdelphi.com/forums/sh...d.php?t=133028 Read the 2nd post).

Edit: Ignore me.
__________________
1771- Programmer, Captain, Drive Team (2009-2012)
4509- Mentor (2013-2015)
1771- Mentor (2015)
Last edited by nighterfighter : 05-02-2015 at 16:06.