|
Re: Mecanum Trouble
Very strange happenings!
So, needless to say, your guys' fixes worked. The reason it didn't help us at first is because we had a Talon IDing issue on our Mobile Test Bed. Then, when we decided to code the drive on our smaller test bed, something very strange happened. Every time we issued a forward signal to the roboRIO, the motors on our test bed ran backwards. After losing a lot of sleep and a lot of troubleshooting, we found out that the smaller motors on our test bed (the bag motors) run reverse of the Mini Cims, which made testing very confusing. Very strange!
|