Quote:
Originally Posted by Kyle Heaton
I would say check the internals for the Talon SRX's, because during the 2015 Control System beta testing, our team ran into a problem where one of the new motor controllers had a wire that wasn't fully soldered down into it's internal board.
|
That wouldn't explain why they are seeing a red strobe (reverse) when they are commanding a positive throttle (0.40 or 40%).
Can you sanity check the throttle they are actually applying and what control mode the talons are in. Use the Self-Test in the roboRIO Web-based config (section 2.4 in Talon SRX Software Reference Manual).