Quote:
Originally Posted by Thromgord
Your board may need a bit of shielding from above and from the sides (wouldn't want an errant tote or bin falling on this fine piece of work). I think that the main breaker is in a reasonably good location, it shouldn't be too hard to turn the robot off if it starts driving off as fast as it can possibly go ("I don't like your team anymore, and I'm moving to Team 254... and there's NOTHING YOU CAN DO TO STOP ME!" It's happened before.) If this happens again and again, I would recommend placing the robot in a cage. A Faraday cage would work fine for this.
All joking aside, excellent electrical board! Nice job. I hope you feel very proud.
|
I think 254 would be too embarrassed to take in our robot even as their 2,000th foster bot. However we are still quite proud of it....Now lets hope we finish it in time. Again all joking aside Ill bend a piece of lexan in the same shape tomorrow and put in over everything. Then Ill hinge it so its still easy to access. I think that will add enough protection while still not being too intrusive. Thanks for the input.