|
Re: Al's Annual Inspection Thread 2015
Quote:
Originally Posted by Al Skierkiewicz
James, while there is no pneumatic rule that this violates what you will have is essentially a device that moves on it's own without being enabled by the FMS. Potentially that could be a violation of R8.
|
R78 (one valve to vent all pressure) essentially requires that cylinders always be ported to pressure (even if it is through a control valve) or atmosphere. enabled or disabled. Both ways would be the same violation of R8. A blocking control valve would potentially prevent this behavior but they are essentially prohibited by R78.,
__________________
If you don't know what you should hook up then you should read a data sheet
|