Quote:
Originally Posted by Mark McLeod
There are some examples here.
The Light Device LED is just a way to make the PCM flash so you can confirm which one it is if you have multiple PCMs.
You can test it by checking it then clicking Save. The PCM will immediately blink rapidly for a second or two. |
We reworked the programming and some LEDs do turn on. However only Solenoid B seems to work. Solenoid A automatically expands the piston and refuses to retract. Solenoid B (used for our noodle system) extends and retracts the piston correctly yet Solenoid A (used for our lift system) extends the piston without the pressing a button and refuses to retract.