|
Re: PCM Solenoid Current Output
I found out the problem was on the connector of the solenoid. They use similar screw terminals to what is used on the power connector for the robo-RIO. A wire was not in the correct position in the connector.
All 3 of them are working now.
All is well. I'll keep in mind we might need another PCM if we use more solenoids. However I don't see that becoming a problem.
__________________
John Fogarty
2010 FTC World Championship Winner & 2013-2014 FRC Orlando Regional Winner
Mentor FRC Team 1102 M'Aiken Magic
"Head Bot Coach" FTC Team 11444 Garnet Squadron
Former Student & Mentor FLL 1102, FTC 1102 & FTC 3864, FRC 1772, FRC 5632
2013 FTC World Championship Guest Speaker
|