Quote:
Originally Posted by Mschmeh144
the talon srx has a closed casing, but so does the sr. the thing I don't like about the talon srx is the wires that come pre-attached. if you cut them or strip them you cannot make a mistake, or you've got yourself a useless talon. even the CAN wires come preattached, in the model that has them at least, im not sure if there is a PWM model.
also, its perfectly okay to have them plugged into the pdp and running on robot startup, but not connected to the motors?
|
There's quite a bit of wire on the SRX controller, it would take a large quantity of screw-ups to shorten the wire to the point where the SRX becomes unusable. If anything, the integrated wires are a plus because the electronics are physically isolated from the outside environment.