Quote:
Originally Posted by Bob Koehl
Greg: How do you tell if the ini file is stale? We have imaged multiple Classmates, installed the update and started the driver station/dashboard. "MOST" displayed the blown up dashboard described earlier. "Some" come out OK. A couple do not link the dashboard to the Driver Station at startup. This is true in either the Driver or the Developer account.
We have updated the video driver on nearly every one to get the higher resolution. We did not keep track as to whether it was done before or after the initial startup of the Driver Station. Either way it leaves us with a very non-desirable screen.
Is there anything else you can suggest?
Bob Koehl, Michigan Engineering Zone Mentor
|
All the classmates that we have used also show this same error from the original picture posted by Cobra Commander.
We have tried both a custom built LabVIEW dashboard (running from .exe) as well as the default one.
The only difference between the two is on the custom dashboard I can see the one extra control that we placed on the front panel. Is there a bug report filed for this or anyone looking into it?