Quote:
Originally Posted by FrankJ
I understand.
From a functionality point of view he check valve needs to be attached directly to the compressor to keep the compression ratio as high as possible. The braided hose there to keep people from attaching plastic hose directly to the compressor which can be hot enough to cause the plastic hose to fail.
|
I checked on this when that compressor became an option a few years ago. The manufacturer requires it as it supplies a cooling path for the hot air. On that compressor only, as it is required by the manufacturer, the hose is considered part of the compressor and must be attached. As a note, I have only seen one in inspection.