|
Re: Light Codes on Victors
On the Victor 888 the light codes are:
• Green = Full Forward
• Orange = Neutral/Brake
• Red = Full Reverse
• Flashing Orange = no PWM
The Victor SP codes are:
• Solid Orange = PWM Signal is within 4% of Neutral
• Blinking Red = Reverse PWM Signal Applied - Blink speed is proportional to input
• Solid Red = Full Reverse PWM Signal is applied
• Blinking Green = Forward PWM Signal Applied - Blink speed is proportional to input
• Solid Green = Full Forward PWM Signal is applied
• Blinking Orange = No PWM Signal
• LEDs Alternate Red/Orange = Damaged Hardware
__________________
|