Quote:
Originally Posted by Greg McKaskle
The easy one is the one about the gyro. It is coming from a VI that you didn't attach, and is most likely telling you that you are reading the gyro from something other than channel 0 or channel 1. The accumulator for the gyro exists on only those channels. The error is not from Begin, but from the BuildCustomDashboardData VI.
|
The gyro used to work before these errors, so I believe this error results from the errors with opening analog channels. Also, the errors repeat, as in they keep popping up on the driver station even if you clear errors, so the ones I posted are not necessarily in order and may not be all of the errors, since they look similar but with different call chains.
Quote:
Originally Posted by Greg McKaskle
I guess the first thing I'd do is open Begin and push the pause button. Clear the error display, and run Robot Main. It should stop in begin, and you can single step over the Open calls and see which runs first and which produces the error.
|
I'll try that the next chance I get.
Thanks