|
Re: Talon SRX limit switches - incorrect operation.
The simplest cause would be if the two limit switch signal lines are being intermittently shorted to each other. In addition to swapping out the talon as suggested in the previous post, I would try swapping out the cable, all the way from the tiny pitch connector on the talon to the limit switches. If the talon lights visibly flicker, it might also be interesting to disconnect the motors from the talons to see if the problem goes away when you remove the motor vibration and drop in battery voltage.
__________________
If you can't find time to do it right, how are you going to find time to do it over?
If you don't pass it on, it never happened.
Robots are great, but inspiration is the reason we're here.
Friends don't let friends use master links.
|