|
Re: VEX Pro Parts Feedback, 2015
We used VEXpro 6 inch mecanums and tube axle this year, both with success.
6 inch mecanums: The rollers would occasionally bind up due to dirt and dust getting to the bushings, but that wasn't the wheel's fault and we just had to be conscious of this between matches.
1/2" tube axle: We used the tube axle in conjunction with the AM14U2 and 1/4-20s going through to keep everything solid. The only problem was that it wasn't a consistent diameter along the 3 foot piece. The 1/2" flange bearings that we bought from VP wouldn't fit in some spots. This was easily fixed on the lathe and some emery cloth. We are very pleased with it and would use it again.
#ballshiftsohard
__________________
2015 - Pioneer Valley District Finalists/Upper Darby District Finalists/MAR District Championship #1 Seed and Winners with 225 and 203
2014 - Lenape Seneca District Winners/Chestnut Hill District Winners
2013 - Lenape Seneca District Winners/Chestnut Hill District Finalists
2011 - Philadelphia Regional Finalists
2009 - Finger Lakes Regional Finalists
|