|
Re: Building Out a Workshop
Quote:
Originally Posted by apb2390
You're right, I used the wrong term for a coarse-tooth blade. I usually hear those called wood blades.
For what it's worth, McMaster does claim that their "Blades for Softwood" are appropriate for aluminum:
Appreciate the correction.
|
I believe the rule of thumb is that you should always have 2-10 teeth in contact with the metal.
__________________
2014-2015: FRC 865 Warp7 Team Captain
2016: FRC 865 Mentor
2017: Free Agent Mentor, Inspector
|