[Sperkowsky]

hello everyone,

so we have ordered all of our parts and I have a few questions but first what we ordered

Vex $125

Flanged Bearing - 13.73mm (1/2" Tight Press ThunderHex) x 1.125in x 0.313in (11-pack)
1/2" ThunderHex Stock (3 feet) x2
#25 Sprocket w/ Hub - 16t - 1/2" Round ID x6
Clamping Shaft Collar - 1/2" Hex ID x4
#25 Heavy Duty Master Link x10

Competition robot parts $50.00

$50 dollar version including rollers and roller hardware

Pitsco

Tetrix .25 chain
Tetrix max chain breaker tool

Andymark $430.00

Planetary GearMotor Bracket (am-2197) x2
PWM Connector Kit (am-2817)
Logitech Extreme 3D Pro USB Joystick (am-2237)
Assorted Heat Shrink Tubing Kit, Red, 127 Pieces (am-2861)
REV Robotics 1" Extrusion, 6ft (am-2901) x3
Assorted Rev Extrusion Brackets x36
REV, 3/8" bore V-groove Ball Bearing (am-2914) x4
#25 Connecting Link for Roller Chain (am-0371) x10
040.5-DP Bimba Air Cylinder w/ nut (am-0292)

Grainger $800
I dont have the full list but it included
1x2 aluminum tubing 6ft x6
1x1 aluninum tubing 6ft x4
1/4 inch rivets
lazy tong rivet tool
and a crap ton of heavy duty steel corner braces for structure.


is all that good enough to build the robot specifically the chain parts as we dont have many parts spare in the shop.

I saw screws that went through chain to connect it to the elevtor what is that called.

We are trying to something similar to team 3940.

thanks