[GeeTwo]

Originally Posted by GeeTwo

.. Would someone please direct me to where I can find answers to the following (and follow-on) questions?

Originally Posted by Nyle

For the clearance holes ..

The clamping gearbox and clamping bearing blocks do everything needed to hold the bearing, ..

Versablocks go on about the same as the plastic clamping bearing blocks, but ..

I don't have any experience with the WCP bearing blocks, ..

For holding everything on the shafts together all you need is collars..

Originally Posted by Knufire

You also might want to take a look at this webpage: http://www.vexrobotics.com/vexpro/ex...ides/?ref=tile

Originally Posted by Aren_Hill

Be sure to check out the drawings at the bottom of each project page, also the application and guides page has some instructions for some drivetrains to get a feel for the system.

Originally Posted by Mike Marandola

This guide can answer a lot of your questions.

Thanks all, these certainly cover all the ground I can think of. I thought I had been all over the Vex site, but completely missed the examples-guides portal page.