|
Re: pic: Wood Coast Drive
Quote:
Originally Posted by EricH
In what way? I happen to be comparing WOOD and polycarb, thank you very much. The comment about the laser cutter was in a statement about WOOD.
|
I believe you are comparing wood and acrylic.
Quote:
|
Originally Posted by EricH
In this case, plywood takes impacts at least as well as polycarb, and is faster by far to cut and install.
|
Polycarb is much more impact resistant than baltic birch.
Quote:
|
Originally Posted by EricH
it's a lot easier to drill without cracking if you forgot to CAD the holes for the laser.
|
It's very difficult to crack both polycarbonate and baltic birch while drilling. Out of the two baltic birch is easier to crack.
Again you can not laser cut polycarb with a commercially available machine.
__________________
2014-2015: FRC 865 Warp7 Team Captain
2016: FRC 865 Mentor
2017: Free Agent Mentor, Inspector
Last edited by mman1506 : 23-05-2015 at 22:31.
|