|
Re: Yumo E6A2-CW3C encoder from Sparkfun
Quote:
Originally Posted by Ether
Thanks for doing this.
.....
Why is CH2 low offset by half a volt?
open it with what app?
|
Honestly, I will have to look into that. I did this really quickly and didn't notice. I'll post the answer in this thread once I investigate a bit further.
As for opening the .DAV file, it would require using EasyScopeX. EasyScopeX also requires the NI-VISA drivers.
You should not need the full 600MB version of NI-VESA, the runtime package should be sufficient.
EasyScopeX is available from http://www.siglent.com/ENs/prodcut-g...d=-1&tid=1&T=1
Make sure to get the version for SDS1000CML as that is the scope version that created the file.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|