|
Re: Yumo E6A2-CW3C encoder from Sparkfun
Quote:
Originally Posted by billbo911
Honestly, I will have to look into that. I did this really quickly and didn't notice. I'll post the answer in this thread once I investigate a bit further.
...
|
Here is the key to what happened to show the ~.5vdc offset. " I did this really quickly "
When I gathered that information, I hadn't properly set up my scope. This was the first time I had used Ch.2 except for doing a low freq. cal on the probes.
So, when you don't match the probe settings (1x 10x) to the scope settings, you get odd values. After proper configuration, the new sample shows <.1 vdc, just like Ch.1, for the low portion of the signal.
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|