|
Re: Encoder programming help needed.
I'd suggest checking the values coming out of the Encoder Get to see if they are what you expect when the encoder is turning.
Verify:
1) That the encoder is working
2) The encoder is counting up instead of down (not -4.398...)
3) The calculation is giving the values you expected
You will need the Reset to get it to work more than once, but it can be dropped inside the True case in an additional case of it's own wired to the button (False).
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 06-07-2015 at 23:16.
|