Quote:
Originally Posted by SerpentEagle
I am using an aluminum block. Is it really that bad with aluminum? I've seen teams use aluminum blocks with threads before, and we've done it before ourselves without many problems.
The coupling nut in the block is an interesting idea. Have you guys tried it before?
|
Aluminum blocks hold threads fine. See the numerous posts others have already replied with.
If doing what you have above with #10 or smaller screws, threads in the blocks will be more than sufficient.
__________________
-Travis Covington
2008-2017 - Engineering Mentor of
Team 254
2001-2008 - Engineering Mentor of
Team 968
1998-2001 - Mechanical Director/Driver/Member of
Team 115