Thread: Bearings vs Bearing Blocks
View Single Post
  #10   Spotlight this post!  
Unread 06-09-2015, 11:07
JCharlton's Avatar
JCharlton JCharlton is offline
Registered User
AKA: JC
no team
Team Role: Mentor
  
Join Date: Jan 2008
Rookie Year: 2002
Location: Montreal
Posts: 122
JCharlton is a splendid one to beholdJCharlton is a splendid one to beholdJCharlton is a splendid one to beholdJCharlton is a splendid one to beholdJCharlton is a splendid one to beholdJCharlton is a splendid one to beholdJCharlton is a splendid one to behold
Re: Bearings vs Bearing Blocks
If you don't have a mill you might want to give this a try:

http://www.trick-tools.com/Slugger_S...inch_SM112_402

Note that you also need to buy the arbor (http://www.trick-tools.com/Slugger_S...rbor_18255_449) too.

I have not used one myself, and can't find out how accurate a hole they make. My guess is "good enough", especially for a team working with simple tools. [Update: one site says 0.0005!]

Step drills in thin (0.60-0.125) material doubled up and rivetted together could be another solution for you.
__________________
"There is no problem so bad that you can’t make it worse." - via Chris Hadfield
Last edited by JCharlton : 06-09-2015 at 11:14.