|
Re: Mysterious CNC Machine
I'd recommend LinuxCNC over Mach3. For either you need the pinout if the DB25 connector to determine which pins to set as step and direction for each axis. Shouldn't be too hard to determine.
__________________
Teacher/Engineer/Machinist - Team 696 Circuit Breakers, 2011 - Present
Mentor/Engineer/Machinist, Team 968 RAWC, 2007-2010
Technical Mentor, Team 696 Circuit Breakers, 2005-2007
Student Mechanical Leader and Driver, Team 696 Circuit Breakers, 2002-2004
|