View Single Post
  #16   Spotlight this post!  
Unread 01-10-2015, 09:49
GeeTwo's Avatar
GeeTwo GeeTwo is offline
Technical Director
AKA: Gus Michel II
FRC #3946 (Tiger Robotics)
Team Role: Mentor
 
Join Date: Jan 2014
Rookie Year: 2013
Location: Slidell, LA
Posts: 3,693
GeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond reputeGeeTwo has a reputation beyond repute
Re: Belt Driven Drive Trains

Quote:
Originally Posted by jkelleyrtp View Post
Stemming from this, is there a maximum length before it is necessary to drive to another pulley and belt system. I could imagine that longer stretches of belts would be more likely to hop teeth and shorten the lifespan, but I see a few teams running belts through their tubing for all 3 wheels.
The length of the belt in this case would be less of a concern than the shallow engagement of the belt with the middle wheel. If you're going to transfer torque, you want to keep the belt firmly against the sheave and spread that torque load out among as many teeth as possible, which usually means 150 to 180 degrees of belt/sheave contact. With three essentially co-linear sheaves on one belt, very few teeth will engage the middle wheel, and the tension in the belt will not do very much to keep those teeth engaged. A snug-fit tube would help a bit on forcing engagement, but would still limit the torque transfer to just a few teeth, greatly increasing the rate of wear. This effect would be even worse if you're driving the middle axle West-Coast style.
__________________

If you can't find time to do it right, how are you going to find time to do it over?
If you don't pass it on, it never happened.
Robots are great, but inspiration is the reason we're here.
Friends don't let friends use master links.