Quote:
Originally Posted by Hsifeulbhsifder
I was wondering if there was anyway of changing the emergency stop key of the driver station to some thing other than the space key. The point of this is to allow driving and programming to be done on the same laptop so we can easily tweak values without having to disable, deploy, and then re-enable. Are there any easy ways of doing this, or would it be better to create our own driver station? Disabling the robot to deploy code is not an option in our case. Thank you.
|
The robot must be disabled for the code to deploy. However you can have 2 computers connected to the robot at the same time. One with the driver station and one with the programming environment so coding can be done while the robot is running. Once you get to the deploy step though the robot will disable itself.