View Single Post
  #2   Spotlight this post!  
Unread 16-11-2015, 01:02
kitare102 kitare102 is offline
Registered User
AKA: Eric
FRC #3042 (Cobalt Catalysts)
Team Role: Mechanical
 
Join Date: May 2014
Rookie Year: 2013
Location: Minnesota
Posts: 61
kitare102 is an unknown quantity at this point
Re: pic: TerrorBytes 2015 Shooter Plate (Drawing) [Rev 2]

Hey, just wanted to chime in and point out that if those 1.125" holes are supposed to be for bearings, you'd need to adjust your dimensions if you wanted them to fit properly. That tolerance is on the edge of being a press fit, though usually I see press fits being .001" under the bearing OD. For a slip fit you'll want larger, around 1.126", and a free fit even more. All depends on how you want the bearing to interact with the plate. Otherwise these are great revisions from the previous drawing.
Reply With Quote