Thread: Delta Drill Press Belt? Aftermarket Part?
View Single Post
  #6   Spotlight this post!  
Unread 17-11-2015, 12:14
Mr V's Avatar
Mr V Mr V is offline
FIRST Senior Mentor Washington
FRC #5588 (Reign)
Team Role: Coach
  
Join Date: Feb 2011
Rookie Year: 2009
Location: Maple Valley Wa
Posts: 996
Mr V has a reputation beyond reputeMr V has a reputation beyond reputeMr V has a reputation beyond reputeMr V has a reputation beyond reputeMr V has a reputation beyond reputeMr V has a reputation beyond reputeMr V has a reputation beyond reputeMr V has a reputation beyond reputeMr V has a reputation beyond reputeMr V has a reputation beyond reputeMr V has a reputation beyond repute
Re: Delta Drill Press Belt? Aftermarket Part?
Do you have an old school hardware store, power equipment store, or NAPA near by? If so take the broken belt in and they'll match it up with a suitable belt. It has a nominal OD of 33" and a nominal width of 5/8". 32.5" is the diameter of the center of the working surface. You want a power transmission belt like used in lawn equipment, washing machines, ect but an automotive belt will work in a pinch and get you back in business today.

The belts with the "teeth" are fully compatible, in theory they last longer by running cooler and run quieter, at least if the teeth have random spacing.
__________________
All statements made on Chief Delphi by me are my own opinions and are not official FIRST rulings or opinions and should not be construed as such.




https://www.facebook.com/pages/Team-...77508782410839