|
Re: Changing the Shafts on a Toughbox Nano
I took the gearboxes apart last year, if I remember correctly you can take the screws out by the bearing. This allows you to slide the gears out and the shaft connected to the middle gear. They may be a snap ring on the output shaft. Just remember which way the bearing are facing, one problem that can happen is the gears pressing against the bearings if put on the wrong side or way.
__________________
2010-2013 Team 353 The POBots - Student, 2014-present Alumni.
2014- present Team 5030 The Second Mouse - Mentor and Founder.
|