Here's our list, in priority order. Our resources are decent; we also are placing about $3k in orders with various vendors pre-season with things we're pretty sure we'll want to have; this is for things we're likely to want, but not quite certain.
Code:
Qty Product(s)
2 PG71 Gearmotor With Encoder (fc16-005)
2 Encoder Kit AMT103-V (fc16-029)
2 Green Ring Light (fc16-099)
4 Air Volume Tank, 32 cu. in., Black Plastic AVT-PP-35 (fc16-021)
1 Compressor, Model 90C (fc16-102)
1 Talon SRX (fc16-064)
1 12V Battery NP18-12 (fc16-036)
6 Lead Screw w/ Nut (fc16-052)
2 1/2" Hex Shaft Collar - CL-8HX-A (fc16-084)
6 1/4" x 1/4" Rigid Coupling - CLX-4-4-A (fc16-085)
6 1/4" Shaft Collar - SP-4-A (fc16-075)
6 1/2" Shaft Collar - ENSP25-8-A (fc16-083)
6 3/8" Shaft Collar - SP-6-A (fc16-077)
6 3/8" x 3/8" Rigid Coupling - CLX-6-6-A (fc16-086)
2 Battery Connector from Anderson Power Products (fc16-008)
2 iglideŽ PRT slewing ring (fc16-056)
2 iglide plastic flange bearing (fc16-106)
2 iglide plastic sleeve bearing (fc16-107)
2 iglide plastic thrust washer (fc16-108)
2 iglide plastic clip bearing (fc16-109)
The "buy now list" includes two AM-14U2s (we build a practice 'bot), some Versaframe and other Vex products (first year for these), another control system, and the various wires and connectors that we are short on. We'll also have a budget of at least $2K (more if/as sponsors come in) to buy stuff after kickoff. If we get enough money early enough, we'll replenish the depleted portions of our pneumatics parts/supplies before kickoff as well.