|
Re: [FTC]: Continuous Servo Keeps Rotating
The servo will not rotate when set to about 0.5 (some servos behave differently than others, 0.49 worked fine for us). And like GeeTwo said, you can't get position information from a continuous rotation servo, so you need some other method.
For 0.45 and 0.55, did the servo move in different directions? If so, the no-rotation spot is somewhere in between.
__________________
2015-present: FTC 10723 mentor
2012-present: 857 mentor
2008-2011: 857 student
2015: Industrial Design, Excellence in Engineering, District Finalist, Archimedes Division (#6 alliance captain)
2014: Judges Award, District Engineering Inspiration, District Finalist, Galileo Division
|