Quote:
Originally Posted by akoscielski3
Woohoo, now this is how you ask Questions! Here are some answers:
...
The 1/2inch jhex broached wheels were out of stock, so we bought the ¾ Outside to ½ insde Hex extrusion from Mcmaster-Carr and glued them inside of the wheel.
|
Were there any fit or tolerance issues with the 3/4 to 1/2 hex extrusion with the 1/2 Hex shaft? Was this the first time 1114 has used this?
Thanks for all the insight on the robot and more importantly the processes.