|
Re: CIM Motor Direct Drive or Supporting Axle
You would be far better off supporting the shaft at the other end. You may also want to look at robot designs from the 2012 FRC competitions. Andymark.com has hubs like what you show that have 1/2", 3/8, 1/4" and other bores. Thus you can do, CIM Shaft >> 8mm Hub >> weel>> 3/8" hub >> 3/8" shaft >> Bearing attached to frame. Also are you familiar with FIRST Robotics already?
__________________
---------------------
Alumni, CAD Designer, machinist, and Mentor: FRC Team #4080
Mentor: Rookie FTC Team "EVE" #10458, FRC Team "Drewbotics" #5812
#banthebag
#RIBMEATS
#1620
Last edited by jman4747 : 15-12-2015 at 20:45.
|