Quote:
Originally Posted by SamM
Nuts and bolts of various sizes
|
Do yourself a favor and only use only one or two hardware sizes. We historically have used #10-32 and 1/4"-20 hardware (though only rarely the latter, it really is overkill)
If by various sizes you mean lengths, then yeah that is fine.
We mostly commonly use 1.5" for bolting panels to 1" extrusion, 2.5" for bolting two extrusions together, and .75" for bolting two or three panels together
__________________
If molecular reactions are deterministic, are all universes identical?
RIP David Shafer: you will be missed

