|
Re: 2016 Beta Software Access
Quote:
Originally Posted by frcguy
The situation is that our team built a chassis with the full 2015 control system except substituting the dlink access point for the Openmesh one that is new for 2016. We are now having problems with wifi control (the robot intermittently connects to driver station) that we haven't been able to pin down, and at this point we are thinking that the problem is with the configuration of the Openmesh AP. On WPIlib's 2016 Control System site, they link to a page for the FRC Radio Configuration Utility on TeamForge, but there is no download there, just a blank release page. We are essentially asking if there is a place we can get that software to image the AP, or someone with experience can help us adjust the AP, which is currently running openWRT, settings so we can use wifi and the driver station to have a basic functioning robot to play around with. I totally understand if you cannot share any software or the like, but can you suggest any steps to take to troubleshoot the connectivity issues? We are completely stuck at this point. Thanks in advance!
|
Have you followed AndyMark's instructions for imaging the AP for 2015 home use?
http://files.andymark.com/OM5P-AN_QuickAP_Setup.pdf
__________________
2016-present: High School Student, FRC 1058 PVC Pirates
2016: RiverRage 20 Champions, Battle of the Bay 3 Champions
2013-2015: Middle School Student, FRC 3467 Windham Windup
|