[m1tche11d]

Our team is trying to deploy an example C++ program to the roboRIO, as per the instructions in the "Getting Started With the 2016 Control System" document, and are running into an error with actually getting the code onto the roboRIO.

When we deploy code to the roboRIO, our debug log has the following output:

Buildfile: C:\Users\DriveStation\workspace\getting_started\bu ild.xml
Trying to override old definition of task classloader
get-target-ip:
[echo] Trying Target: roboRIO-1997-FRC.local
[echo] roboRIO found via mDNS
dependencies:
[echo] roboRIO image version validated
deploy:
[sshexec] Connecting to roboRIO-1997-FRC.local:22
[sshexec] cmd : rm -f /home/lvuser/FRCUserProgram
[echo] [athena-deploy] Copying code over.
[scp] Connecting to roboRIO-1997-FRC.local:22
[scp] done.
[sshexec] Connecting to roboRIO-1997-FRC.local:22
[sshexec] cmd : killall -q netconsole-host || :
[scp] Connecting to roboRIO-1997-FRC.local:22
[scp] done.
[echo] [athena-deploy] Starting program.
[sshexec] Connecting to roboRIO-1997-FRC.local:22
[sshexec] cmd : . /etc/profile.d/natinst-path.sh; chmod a+x /home/lvuser/FRCUserProgram; /usr/local/frc/bin/frcKillRobot.sh -t -r;
[sshexec] Connecting to roboRIO-1997-FRC.local:22
[sshexec] cmd : sync
BUILD SUCCESSFUL
Total time: 10 seconds

Everything appears to be successful, however the roboRIO comm light is red (indicating no code) and the driver station still shows no robot code.