View Single Post
  #18   Spotlight this post!  
Unread 14-01-2016, 11:09
Joe G.'s Avatar
Joe G. Joe G. is offline
Taking a few years (mostly) off
AKA: Josepher
no team (Formerly 1687, 5400)
Team Role: Mentor
 
Join Date: Sep 2006
Rookie Year: 2007
Location: Worcester, MA
Posts: 1,453
Joe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond reputeJoe G. has a reputation beyond repute
Send a message via AIM to Joe G.
Re: Feasibility of Design by Rookie team?

Both a top/bottom roller design, and a top roller+ramp design are viable solutions. We actually had a surprising level of success with side rollers as well -- take a look at Greenhorns Ri3D for an example of this.

Whatever you go with, prototype it! Make sure that your proposed geometry actually engages with the ball the way you expect it to. A little testing goes a long way.
__________________
FIRST is not about doing what you can with what you know. It is about doing what you thought impossible, with what you were inspired to become.

2007-2010: Student, FRC 1687, Highlander Robotics
2012-2014: Technical Mentor, FRC 1687, Highlander Robotics
2015-2016: Lead Mentor, FRC 5400, Team WARP
2016-???: Volunteer and freelance mentor-for-hire

Last edited by Joe G. : 14-01-2016 at 11:16.